Point Cloud Modeling: A Flourishing Technology in Construction Industry

Point Cloud modeling or Point Cloud BIM is gaining popularity among architects and other professionals. But what exactly is this Point Cloud BIM? Let’s understand it:

Initially, a structure is scanned using laser technique. The scanned data is collected in form of points in the three-dimensional coordinate system. Ths data is stored in a large database called ‘Point Cloud’. Hence, we can say that a point cloud modeling service allows collecting and storing data of a structure in a very accurate digital record.

The scanning of structure takes place in a quick and easy way through the use of lasers which is collected and stored as ‘Scan to BIM’. This scan to BIM service is further used for creating 3D models. Laser scanning offers several benefits. Few of them are mentioned here:

• A lot of time is saved for scanning through laser technique.
• A large amount of data is collected in a very short time. Sharing of data becomes quick and easy as well as the speedy discharge of activity on site.
• Accuracy is also a benefit of this scanning process.
• Precise off-site fabrication and less on-site changes are the added benefits of scanning.
• Site revisions can be reduced as it helps in a faster turnaround.

Now that we are through with the scanning part, let us understand what are the benefits of point cloud visualization during the project lifecycle:

1. During Preconstruction:

• Point cloud visualization gives a virtual image of the project before even the construction process commences.
• Owners and engineers can make better decisions with the help of these virtual models during early phases thus relieving them from any confusion after construction starts.
• A site can be viewed accurately prior to the construction so it gives an early insight into the plan and designs saving a lot of rework afterward.
• It is the key to cost and time savings on site.

2. During Construction:

• Point cloud BIM during construction phase offers a quick check of the project progress. It ensures whether the project is progressing in accordance with the designs or not. Planning also becomes easy with the derived footprints, elevations, sections and 3D models.
• As the construction begins, the point cloud modeling helps in easy interior fitting, full record scan, 2D floor plan, and more.

3. Post Construction:

• As-built records are maintained once the project completes. This is in form of drawings which provide a complete guideline on what is actually built at the end of a project. Point cloud modeling offers easy creation of as-built records.
• If there are any changes to be made in the project for renovation, then the point cloud BIM comes into play as all the records are maintained in a single database which is easy to handle and manage. Thus, it allows easy renovation of the existing structures.

We are offering Point Cloud BIM services:

SteelConstruction Detailing Pvt. Ltd. is offering Point Cloud BIM and Point Cloud modeling services to its clients for giving them the benefits mentioned above. We understand the market trends and thus offer uniqueness while integrating the trends into our services. With the use of BIM, we offer effective storage and management of the project data in form of a point cloud.

If you have any query regarding point cloud technology, please comment below. To avail any of our services, please visit our company website and request a free quote.

Major Benefits of Tekla in Precast Detailing

Before understanding the benefits of using Tekla for precast detailing, first, let us get a brief introduction to Tekla software and what it offers.

What is Tekla Software?

Tekla is a BIM software used for building steel and concrete structures. It incorporates the features of 3D modeling for engineers. In the construction industry, it is used for structural steel detailing and precast concrete detailing. It guides structural engineers from concept through fabrication for steel and concrete structures. It automizes the process of creating shop drawings.

Tekla supports the creation of models for structural steel, concrete, rebar, and miscellaneous steel. It is, in fact, specifically designed to be used for steel and concrete. Till date engineers have used this software for building skyscrapers, bridges, residencies, factories, plants, offshore plants and model stadiums.

What Tekla offers?

Now that we are through with the concept of Tekla, let’s see what it has to offer in the construction industry: 

    • With the use of Tekla, one can build any structure regardless of material and size.

    • Detect clashes early in the fabrication process and avoid it beforehand.

    • Get precise drawings and reports from the model.

    • Streamline the workflow with approved standards.

Let’s dig deep into this and understand the major role of Tekla in precast detailing:

    • Error-free precast concrete detailing:

Errors in detailing leads to inaccurate information which is the cause for an increased cost. Rework is done leading to wastage of material and time. When working with Tekla, one can identify and detect clashes earlier before fabrication process actually begins with models created. Hence, it reduces on-site problems and reworks. 

Tekla models include all the information for generating drawings, reports, and other fabrication data. This reduces the chances of human errors as changes can be automatically updated through these models. Hence, information remains consistent. This ultimately improves collaboration between design, factory and site teams.

    • Virtual Building:

Tekla precast concrete detailing allows a direct interaction with building information models. This gives the benefit of intelligent and accurate connections to make sure everything fits in together well.

Tekla comes with a predefined set of special tools for precast industry. It offers 3D components for building quality information models. This 3D visualization optimizes the way designs are communicated to the clients. It also allows automatic creation of bills for materials, bar bending schedules, and other reports. Changes can be easily updated and communicated.

    • Option for Customization:

One can create custom tools using Tekla for structural steel detailing ensuring intelligent connections, reinforcements and model components. This customization is also applicable to fabrication reports and erection drawings. One can also share, update and manage tools customized for the company with the team.

    • Easy Sharing:

Tekla allows sharing same models from anywhere, anytime regardless of the internet speed. This enhances collaboration between the teams.

We are offering Tekla services:

Steel Construction Detailing Pvt. Ltd. is offering Tekla precast panel detailing with improved efficiency and quality. Our structural steel detailing services are provided by expert detailers so as to minimize the risks of failure. We abide by the standards and codes followed by the construction industry.

10 Advantages of Precast Structures

Compared to site-cast structures, precast structures have more advantages. Let us have a look at these advantages: 

    1. High Quality:

Precast concrete structures are cast in a controlled environment. Hence, these structures have high quality compared to site cast structures. Precast structures do not have problems related to dust, humidity, temperature changes, or unreliable quality of materials.

    2. Low Maintenance:

Precast panels or precast structures have a long lifecycle with reduced costs. The precast structures have uniform quality, fewesr risks of cracks or damage, and low maintenance costs.

    3. Easy Installation:

Precast panels are built in the factory itself and then transported on site where they are ready to be installed. Unlike raw materials that require huge machinery for transportation and installation, precast structures undergo fuss-free installation.

    4. Minimal on-site work:

The precast panels or structures are produced off-site and hence it reduces the complex work on-site. This allows simultaneous activities to be carried out including finishes and interiors.

    5. Speedy construction and Strength:

Precast structures are transported to the site on a timely basis. Hence, the time required for rod bending, and concrete pouring can be saved. Precast structures can be laid within minutes depending on site conditions. Precast structures can be built in days or weeks, unlike site cast structures that require months or years.

    6. Weather and Fire Resistance:

Precast concrete can be used for any weather conditions from scorching heat to freezing cold temperature. Precast concrete has the ability to resist fire as it is non-combustible. It does not require any additional fireproofing application.

    7. Flexible Designs:

Precasting provides flexibility to the designers for creating structural designs. Also, it allows the creation of longer spans without intermediate columns and beams with less use of concrete and steel, unlike conventional design that requires materials in bulk. 

    8. Recyclable: 

When crushed, pre-casted structures can be reused in one form or the other. It can be used for road construction or construction fill. Recovery rate is much higher for precast structures allowing them to be used for manufacturing a new precast structure altogether. This provides economic and environmental savings.

    9. Water and Sound Resistance:

Precast structures have high thermal mass making them a good choice for sound insulation. They reduce the noise providing a sound barrier against roads and urban noises. Concrete is made up of high-grade cement so the precast concrete structures have higher resistance to water. It can be used to preserve water for irrigation sites.

    10.  Energy Efficient:

The thermal mass of precast concrete absorbs and releases heat slowly thus reducing the energy usage. The heating and cooling costs can thus be reduced by about 30%.

Apart from these, precast structures can also be used in the ducting system to channel air around the building. They act as heat exchangers between rooms having different temperatures.

Company Synopsis:

Steel Construction Detailing Pvt. Ltd. is a leading Structural engineering services provider offering valuable services like Structural steel detailing and Precast panel detailing. We specialize in design and detailing sector for architectural, structural or MEP related projects. Our expert designers and detailers never miss out on quality and standards set by the industry.

4 World Famous Structures with Unique Designs

The Structures are an important part of the society. While some have historical importance, others have religious values associated with them. Others are used for a miscellaneous purpose. Whenever we visit some far across places, the first thing that comes to our attraction is its famous structures.

Structures require to be built with utmost accuracy and precision otherwise it will lead to a failure. Structural engineering services from reputed companies and engineers will provide a vision to build successful masterpieces.

Here’s a short list of such masterpieces in the world:

1. The Dancing House, Prague:

Nicknamed as “The Dancing House”, the Nationale Nederlanden building is situated in Prague. It is sometimes referred to as “Fred and Ginger”, named after two world-famous dancers Fred Astaire and Ginger Rogers.

The building has a unique dancing shape made up of 99 concrete panels, each with different dimension and shape. It has a restaurant, a gallery, a conference center and office premises. Most importantly, it has a terrace for sightseeing from where one can have a wonderful view of Prague.

2. Milwaukee Art Museum, Wisconsin

The Milwaukee Art Museum is situated near Lake Michigan in Wisconsin. It was initially designed by Eero Saarinen as a war memorial in 1957. Then came the Kahler Building designed by David Kahler in 1975. And at last, Santiago Calatrava designed the Quadracci Pavilion in 2001. At shore level, the structure houses an atrium, a gallery space for exhibitions, an education center with 300 seats, and a gift shop. It also has a restaurant with 100 seats from where one can enjoy the view of the lake.

The design is inspired by many natural elements like moving steel louvers inspired by the wings of a bird. A cabled bridge with a mast inspired by a sailboat and a curving galleria inspired by a wave.

   3. Lotus Temple, New Delhi

The Lotus Temple is situated in New Delhi and it is a place of worship for Bahá'í. The place has a capacity of 2500 people with nine sides and nine doors. The whole temple resembles a lotus flower with 27 petal-like structures. The central hall of this temple is as high as 40m. It has the surface made from the white marble of Mount Pentelicus in Greece. Since its creation, it has become one of the most visited structures of the world.

4. Cologne Cathedral, Cologne

It is the greatest Gothic cathedral in Germany and it is a seat of the Catholic Archbishop. Once it was the world’ tallest building with a high five-aisled basilica. Its construction started long back in 1248 which was stopped in 1473. The work was resumed only in the 19^th century and it got completed in 1880.

It showcases several works of art. The exterior of the cathedral has seven feet gilded silver and jewels. The interior has Sarcophagus of the Magi which is a gilded sarcophagus. Three golden-crowned skulls are placed inside and it is believed that they belong to the Three Magi. The Gero Cross, the Chapel of the Virgin, and the Mandonna of Milan are the spots not to be missed while taking a tour of this masterpiece. It also has several master artwork of paintings.

Services offered by us:

SteelConstruction Detailing Pvt. Ltd. is a leading CAD based service provider offering several structural engineering services. Our services in this field include Structural CAD Drafting, Structural Analysis Design, structural 3D modeling, structural steel detailing and more. We provide our services with the best quality and precision. Our structural engineers have enough talent and experience to provide solutions for the most complex structural requirements.

Quality Rebar Detailing: A Prerequisite for Reinforced Concrete Structures

Proper designing, rebar detailing and construction together make sure rebar structures do not fall short of strength and quality, to generate cracks or deflection. A high-quality rebar detailing is a necessity when it comes to reinforced concrete structures. Here we will discuss what exactly is rebar detailing and how a rebar detailing company helps a contractor to carry out work successfully.   

What is Rebar Detailing?

Rebar detailing is the process of preparing technical drawings for construction. It is usually prepared by contractors and suppliers. It is different from construction documents and provides details for fabrication or installation.

Now that we are familiar with the concept of rebar detailing, let us try to understand why is it fruitful to choose a good detailing company.

A good rebar detailing company often holds following qualities  :

    • A detailing company holding a good profile will have experience in a variety of projects. Achieving expertise in any field is possible through experience only.

    • Such a company will hire skilled and experienced detailers to give the best output. This will ensure that quality will never be compromised when working with such a company for Rebar Steel Detailing service.

    • They will make sure that not only the detailers but also the software used by them is a correct choice or not. They will also develop their own software.

    • Today, most of the companies are using software to generate rebar detailing drawings. But not all of them provide the feature of customization. In certain cases, the clients may come up with special requirements for their project. A good company will welcome such requirements if they have in-house software which can handle the client needs as and when required. Such a company is capable of generating top quality rebar detailing drawings.

    • A good detailing company will also provide an automated platform to its detailers so that any changes can be updated automatically. This will make sure that any changes from client side are fulfilled to the fullest without imposing a burden on the detailers. The detailers can achieve uniform detailing without having several interpretations. The segments of information are integrated and the output is checked at every stage using such platform.

    • Finally, a good rebar detailing company will never fail to address their client requirements. They will make sure all the concerns of a client are answered to give approved quality products and services. Such a company is also capable of generating multiple solutions for a detailing project at any time.

The best rebar detailing company will have practiced all of the above to provide services to its client.

We are providing rebar detailing services :

Steel Construction Detailing Pvt. Ltd. believes that the rebar detailing services must be for its intended use, practical, cost-effective, and of high quality. Thus we are providing all the enlisted qualities while delivering our services. Our Rebar Drawing Service goes through quality checking to achieve maximum client satisfaction. We also outsource our designing and detailing services to countries abroad.